40l 1 Hp Oil Free Air Compressor Distributor

Kito, a famous 1 hp oil free air compressor distributor.

A 1 HP oil-free air compressor is a compact and low-maintenance option suitable for a variety of applications, particularly in environments where oil-free operation is beneficial. Oil-free compressors do not require regular oil changes, making them easier to maintain. These compressors are ideal for applications where clean, oil-free air is essential, such as for airbrushes, inflating tires, and light pneumatic tools. They typically use a piston and cylinder design that does not require lubrication, which helps in reducing the risk of oil contamination in the air supply. The 1 HP motor provides adequate power for light to moderate tasks. You can expect airflow rates around 2.5 to 4 cubic feet per minute (CFM) at 90 PSI, depending on the model and tank size.

Parameter

Model

Partnumber

l/min

CFM

rpm

volt

Bar

dB(A)

L×W×H

ZWBL-0.075

KAWL750

2.63

0.75

1450

220/50

44×44×77

DETAILS

Vertical tank oil free air compressor pump

Vertical tank oil free air compressor parts

APPLICATION RANGE

TIRE PUMPING

DENTAL TREATMENT

CAR MAINTENANCE

SPRAY PAINT

WOODWORKING NAILING

ADVANTAGE

HIGH SECURITY

Using the internal spraying technology of the gas storage tank, it truly ensures that the discharged gas is clean and oil-free, while avoiding the corrosion of the tank body by the water in the compressed gas, the service life of the tank is greatly extended and its safety is reliably guaranteed.

FAST HEAT TRANSFER

Double sided air duct design is adopted to quickly cool the motor;At the same time, the axial flow nine leaf fan is adopted, with uniform air flow, good air supply effect and low noise.

HIGH STABILITY

High quality copper enameled wire with high temperature resistance conforming to the national standard B insulation, automatic production and testing equipment, increasing the stability and service life of the product.

OVERLOAD PROTECTION

The safety valve meeting the EU CE safety requirements is sensitive and automatically discharges below the design pressure of the pressure vessel; The high-quality solenoid valve can empty the gas in the high-pressure pipe when the power is cut off instantaneously. There is no need tovent after the power is plugged in, and the machine can be started immediately.

ENVIRONMENT PROTECTION

The high power factor design reduces the heating amount of reactive part current, saves more than 10% of power, and has obvious energy-saving effect.

LOW MAINTENANCE COST

The piston ring is made of PTDE, a new self-lubricating and environmentally friendly material with a low coefficient of friction.

6061 aviation hard aluminium material, high temperature
resistance, high hardness,anti oxidation treatment of the inner wall aviation grade plating, effectively improve the surface density and wear resistance.

The inlet and exhaust valves are made of Swedish valve steel belt after more than 100 hours of precision rlling and polishing.

SUPER QUIET

The whole 40l compressor machine structure adopts brand-new three- dimensional optimization and design, while balancing inertia force and vibration reduction design, with reasonable structure and low vibration;
Reasonable air flow channel design reduces the noise and loss of air flow. At the same time, it has higher volumetric efficiency and significantly lower noise than similar products.

HIGH QUALITY MOTOR

The motor uses an advanced design system coupled with an all copper silicon steel sheet motor to ensure low input power, maximum efficiency, low energy consumption, high performance and high reliability.